Knowledge Base (FDM)

Basic Maintenance of 3D Printers and Preventive Actions
Like any kind of technical device, a 3D printer works best when the operator performs checks at each time of use, and also performs preventive maintenance a...
Mon, 20 May, 2019 at 4:57 PM
Filter for cleaning and lubricating filaments for 3D printers
It is very important that 3D printers using filaments are only fed with a plastic wire that is clean from dirt and which is also lubricated. This article de...
Mon, 20 May, 2019 at 4:34 PM
If Flashprint crashes
The FlashPrint slicer program from FlashForge.com is extremely stable, and we run it works well on virtually all new and old computers we tested. Causes...
Mon, 20 May, 2019 at 4:34 PM
Change to "Expert Mode" in Flashprint
The 3D print program FlashPrint from FlashForge is used to print 3D files on FlashForge 3D printers. When you click the Print button, a dialog opens in whic...
Mon, 20 May, 2019 at 4:35 PM
The importance of a good first layer
It´s imperative that you always monitor the printer during the initial parts of the print, making sure everything is going well & checking for possible ...
Mon, 20 May, 2019 at 4:36 PM